 |
| Quantity: | |||||||||
|---|---|---|---|---|---|---|---|---|---|
The component: synthetic resin,glass bead,pigment,additive,etc.
Synthetic resin: Thermal plasticity and hot melt,make the road strong adhesive’
Additives:Increase coating plasticity, resist deposition,anti-pollution and discoloration;
Coloring pigment: White is titanium dioxide,zinc oxide, etc, yellow is heat resistant lead;
Filler: Mechanical strength, wear resistance and color phase, the size of particle on the fluidity;
Glass beads: Improve the identification, brightness and durability at night.
| Test Item | Test Requirements |
| Density g/m³ | 1.8-2.3 |
| Softening Point Degree | 90-125 |
| Appearance of paint film | After drying the paint film no wrinkle ,produce flecks .blister ,crack,flake |
| No pick up time,min | Less than 3min |
| Luminance Factor (white color) | Greater than 0.8 |
| Luminance Factor (Yellow color ) | Greater than 0.8 |
| Intensity of Compression MPa | Greater than 15 |
| Abrasion resistance ,mg | Less than 80 (JM-100 rubber grinding wheel |
| Water resistance | The specimens no deterioration of the surface after dipped in water for 24 h |
| Alkaline resistance | The specimens no deterioration surface after dipped in calcium hydroxide 24 h |
| Glass beads content% | China standard 25% , BS3262 30% , AAS I-ITO 35-40% |
| Fluxional degree, s | 38 |
| Low temoerature crack resistance | 10 degree for 4h ,then at room for 4h ,total three cycles , no crack |
| Heat Stability | With stirring for 4h at 200 to 220 degree , the paint no change |
The two-component making paint is based on the cold m*t*yl m*th*cryl*te resin system and solvent-free formulation product processing, with A and B components separate packaging, pavement construction, A and B component need to adding curing agent, using special equipment, according to the needs of paint mixing as 98:1 internal mixing or 1:1 internal mixing (or outer mixed)by spaying,coating, formed the lines after curing dry by chemical reaction. It has excellent anti-slip and high wear-resisting performance, long-life, and high reflective at rain night.
Product Feature:
Green environmental protection
Quick drying and wear-resisting
Hard and wear-resistant
High reflective
Convenient construction
Product Feature:
1. Unique raise design effectively enhances the visibility of the making line.
2. Once the tyre of car driving on the raised line, the vibration is quickly generated, preventing fatigue driving and reminding the driver to drive safely,
3. In the downhill and comer sections, slow down the driving speed, play the deceleration effect, enhance the driving safety.
4. On the rainy day, the raised line can enhance the reflective effect to ensure safe driving.
The component: synthetic resin,glass bead,pigment,additive,etc.
Synthetic resin: Thermal plasticity and hot melt,make the road strong adhesive’
Additives:Increase coating plasticity, resist deposition,anti-pollution and discoloration;
Coloring pigment: White is titanium dioxide,zinc oxide, etc, yellow is heat resistant lead;
Filler: Mechanical strength, wear resistance and color phase, the size of particle on the fluidity;
Glass beads: Improve the identification, brightness and durability at night.
| Test Item | Test Requirements |
| Density g/m³ | 1.8-2.3 |
| Softening Point Degree | 90-125 |
| Appearance of paint film | After drying the paint film no wrinkle ,produce flecks .blister ,crack,flake |
| No pick up time,min | Less than 3min |
| Luminance Factor (white color) | Greater than 0.8 |
| Luminance Factor (Yellow color ) | Greater than 0.8 |
| Intensity of Compression MPa | Greater than 15 |
| Abrasion resistance ,mg | Less than 80 (JM-100 rubber grinding wheel |
| Water resistance | The specimens no deterioration of the surface after dipped in water for 24 h |
| Alkaline resistance | The specimens no deterioration surface after dipped in calcium hydroxide 24 h |
| Glass beads content% | China standard 25% , BS3262 30% , AAS I-ITO 35-40% |
| Fluxional degree, s | 38 |
| Low temoerature crack resistance | 10 degree for 4h ,then at room for 4h ,total three cycles , no crack |
| Heat Stability | With stirring for 4h at 200 to 220 degree , the paint no change |
The two-component making paint is based on the cold m*t*yl m*th*cryl*te resin system and solvent-free formulation product processing, with A and B components separate packaging, pavement construction, A and B component need to adding curing agent, using special equipment, according to the needs of paint mixing as 98:1 internal mixing or 1:1 internal mixing (or outer mixed)by spaying,coating, formed the lines after curing dry by chemical reaction. It has excellent anti-slip and high wear-resisting performance, long-life, and high reflective at rain night.
Product Feature:
Green environmental protection
Quick drying and wear-resisting
Hard and wear-resistant
High reflective
Convenient construction
Product Feature:
1. Unique raise design effectively enhances the visibility of the making line.
2. Once the tyre of car driving on the raised line, the vibration is quickly generated, preventing fatigue driving and reminding the driver to drive safely,
3. In the downhill and comer sections, slow down the driving speed, play the deceleration effect, enhance the driving safety.
4. On the rainy day, the raised line can enhance the reflective effect to ensure safe driving.
