 |
| Quantity: | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Product Description：
A two-component, high-build, aliphatic acrylic polyurethane topcoat, a matte topcoat with excellent color retention, used as a topcoat for steel structures under moderate corrosion conditions.
Our BGA-40 Acrylic Polyurethane Paint Finish offers a premium solution for your coating needs. Crafted with high-quality acrylic polyurethane, this paint finish provides exceptional durability and long-lasting protection for various surfaces. Whether for industrial machinery, automotive parts, or architectural elements, our acrylic polyurethane paint delivers superior performance and a flawless finish. Compared to other products on the market, our BGA-40 stands out for its resistance to abrasion, chemicals, and weathering, ensuring your surfaces remain pristine for years to come. Trust in our acrylic polyurethane paint finish to elevate the appearance and durability of your projects, delivering unparalleled quality and value.
Product Usage：
Suitable as a new construction paint and maintenance topcoat, specifically designed for use in areas where high gloss is not desired.
Physical parameters:
Color: various colors
Volume solid content: 58±2%
Standard film thickness: Dry film: 60 microns Wet film: 103 microns
Theoretical coating rate: 6.9㎡/kg, 9.7㎡/L (based on 60 micron dry film)
Actual Coverage Rate: Consider Appropriate Loss Factors
Flash point: 29±2℃(after mixing)
Construction Instructions:
Surface treatment:
All surfaces to be coated should be clean, dry and free of contamination. Prior to painting, all surfaces should be assessed and treated in accordance with ISO8504:2000 standards. This product should always be applied over a recommended anti-rust paint. The primer surface should be dry and free of contamination. This product must be applied within the specified recoating intervals. Flaked and damaged areas should be treated to the specified standard Sa2.5 (ISO8501-1:2007) or SSPC-SP6) and these areas should be reprimed before applying this product. The substrate temperature should not be lower than 10℃, and should be at least 3℃ higher than the air dew point temperature.
Mixing: This product comes in two cans to form one unit. It must be mixed in pairs at one time according to the prescribed ratio each time, and used up within the prescribed mixing period.
Mixing service life:
15℃ | 25℃ | 40℃ |
4H | 2H | 1H |
Thinner: JINYU No. 2Thinner
Construction method: | airless spray | air spray (with pressure tank) | brush/roller |
Dilution ratio: | 0-5% | 5-10% | 0-5% |
Airless spray:
Nozzle size: 0.33-0.46mm
Discharge pressure: 15MPa
Drying time:
(Wet film thickness 103μm, relative humidity 50%) | 15℃ | 25℃ | 35℃ |
Fingers dry to touch | 4H | 1H | 0.5H |
Transportable | 24H | 6H | 6H |
fully cured | 10days | 7days | 2days |
Recoat interval:
(Wet film thickness 103μm, relative humidity 50%) | 15℃ | 25℃ | 35℃ |
shortest | 5H | 4H | 1H |
Packing specifications: 25KG/group
Product Description：
A two-component, high-build, aliphatic acrylic polyurethane topcoat, a matte topcoat with excellent color retention, used as a topcoat for steel structures under moderate corrosion conditions.
Our BGA-40 Acrylic Polyurethane Paint Finish offers a premium solution for your coating needs. Crafted with high-quality acrylic polyurethane, this paint finish provides exceptional durability and long-lasting protection for various surfaces. Whether for industrial machinery, automotive parts, or architectural elements, our acrylic polyurethane paint delivers superior performance and a flawless finish. Compared to other products on the market, our BGA-40 stands out for its resistance to abrasion, chemicals, and weathering, ensuring your surfaces remain pristine for years to come. Trust in our acrylic polyurethane paint finish to elevate the appearance and durability of your projects, delivering unparalleled quality and value.
Product Usage：
Suitable as a new construction paint and maintenance topcoat, specifically designed for use in areas where high gloss is not desired.
Physical parameters:
Color: various colors
Volume solid content: 58±2%
Standard film thickness: Dry film: 60 microns Wet film: 103 microns
Theoretical coating rate: 6.9㎡/kg, 9.7㎡/L (based on 60 micron dry film)
Actual Coverage Rate: Consider Appropriate Loss Factors
Flash point: 29±2℃(after mixing)
Construction Instructions:
Surface treatment:
All surfaces to be coated should be clean, dry and free of contamination. Prior to painting, all surfaces should be assessed and treated in accordance with ISO8504:2000 standards. This product should always be applied over a recommended anti-rust paint. The primer surface should be dry and free of contamination. This product must be applied within the specified recoating intervals. Flaked and damaged areas should be treated to the specified standard Sa2.5 (ISO8501-1:2007) or SSPC-SP6) and these areas should be reprimed before applying this product. The substrate temperature should not be lower than 10℃, and should be at least 3℃ higher than the air dew point temperature.
Mixing: This product comes in two cans to form one unit. It must be mixed in pairs at one time according to the prescribed ratio each time, and used up within the prescribed mixing period.
Mixing service life:
15℃ | 25℃ | 40℃ |
4H | 2H | 1H |
Thinner: JINYU No. 2Thinner
Construction method: | airless spray | air spray (with pressure tank) | brush/roller |
Dilution ratio: | 0-5% | 5-10% | 0-5% |
Airless spray:
Nozzle size: 0.33-0.46mm
Discharge pressure: 15MPa
Drying time:
(Wet film thickness 103μm, relative humidity 50%) | 15℃ | 25℃ | 35℃ |
Fingers dry to touch | 4H | 1H | 0.5H |
Transportable | 24H | 6H | 6H |
fully cured | 10days | 7days | 2days |
Recoat interval:
(Wet film thickness 103μm, relative humidity 50%) | 15℃ | 25℃ | 35℃ |
shortest | 5H | 4H | 1H |
Packing specifications: 25KG/group
