 |
| Quantity: | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Product Description:
This product is a two-component thick-build epoxy resin paint with high anti-corrosion performance containing graphene, high volume solid content and low VOC content. It is suitable for new steel structures and steel structure maintenance.
Our BGM-90 Graphene Universal Epoxy Anticorrosive Paint sets the standard for superior corrosion protection. Infused with graphene technology, this innovative paint offers unmatched durability and resilience against harsh environmental conditions. Its universal application makes it ideal for various surfaces, including steel, concrete, and industrial equipment. Compared to traditional epoxy paints, our BGM-90 formula delivers extended protection, ensuring your assets remain corrosion-free for longer periods. Trust in our Graphene Universal Epoxy Anticorrosive Paint to safeguard your investments and provide long-lasting durability, offering unmatched performance and peace of mind.
Product Usage:
Can be used on a variety of substrates, including manually treated rusted steel, sandblasted steel, and a variety of intact aged coatings. It can provide excellent anti-corrosion protection for industrial, coastal, petrochemical, bridge and offshore facilities in the atmospheric environment and water.
Physical Parameters:
Color: various colors
Volume solid content: 82±2%
Standard film thickness: Dry film: 150 microns Wet film: 183 microns
Theoretical coating rate: 3.7㎡/kg 5.4㎡/L (based on 150 micron dry film)
Actual Coverage Rate: Consider Appropriate Loss Factors
Flash point: 28±2℃(after mixing)
Construction Instructions:
Surface Preparation: All surfaces to be coated should be clean, dry and free of contamination. Before painting, all surfaces should be assessed and treated according to ISO8504:2000 standards. Pre-primed surfaces This product can be applied over anti-rust paint. The primer surface should be dry and free of contamination. Areas of spalling and damage should be treated to the specified standard Sa2.5 (ISO8501-1:2007) or SSPC-SP6 blast treatment standard, or SSPC-SP11 manual/power treatment standard, and should be treated before applying this product. Reapply primer to these areas.
Manual or powered processing
Perform manual or power processing to at least meet the standards of St3 (ISO8501-1:2007) or SSPC-SP2. Note: All oxide scale must be removed. Any parts that cannot be adequately treated with a shovel or striker gun should be subject to local blasting treatment to make the surface at least meet Sa2 (ISO8501-1:2007) or SPPC-SP6 standards. Generally speaking, this applies to Class C or D rust standards.
Surfaces precoated with zinc-containing primer
Check that the primer surface is clean, dry, and free of contamination and zinc salts before applying this product. Make sure the zinc-containing primer is completely cured before applying other paints.
Recommended surface roughness is 50-70 microns.
The substrate temperature should not be lower than 10℃ and should be at least 3℃ higher than the air dew point temperature.
Mixing: This product comes in two cans to form one unit. It must be mixed in pairs at one time according to the prescribed ratio every time, and used up within the prescribed mixing period.
(1) Stir the base ingredients (A) with a power mixer
(2) Mix all the curing agent (B) and base material (A) together and stir thoroughly with a power mixer.
Mixing service life:
15℃ | 25℃ | 35℃ |
4H | 2H | 1H |
Thinner: JINYU No. 1 Thinner
Construction method: | airless spray | air spray (with pressure tank) | brush/roller |
Dilution ratio: | 0-5% | 5-15% | 5-10% |
Airless spray:
Nozzle size: 0.58-0.79mm
Discharge pressure: 15MPa
Drying Time:
(Wet film thickness 156μm, relative humidity 50%) | 15℃ | 25℃ | 35℃ |
Fingers dry to touch | 6H | 2H | 1H |
Transportable | 18H | 8H | 4H |
fully cured | 14 days | 7 days | 3 days |
Recoat interval:
(Wet film thickness 156μm, relative humidity 50%) | 15℃ | 25℃ | 35℃ |
shortest | 18H | 8H | 4H |
Packing specifications: 25KG/group
Product Description:
This product is a two-component thick-build epoxy resin paint with high anti-corrosion performance containing graphene, high volume solid content and low VOC content. It is suitable for new steel structures and steel structure maintenance.
Our BGM-90 Graphene Universal Epoxy Anticorrosive Paint sets the standard for superior corrosion protection. Infused with graphene technology, this innovative paint offers unmatched durability and resilience against harsh environmental conditions. Its universal application makes it ideal for various surfaces, including steel, concrete, and industrial equipment. Compared to traditional epoxy paints, our BGM-90 formula delivers extended protection, ensuring your assets remain corrosion-free for longer periods. Trust in our Graphene Universal Epoxy Anticorrosive Paint to safeguard your investments and provide long-lasting durability, offering unmatched performance and peace of mind.
Product Usage:
Can be used on a variety of substrates, including manually treated rusted steel, sandblasted steel, and a variety of intact aged coatings. It can provide excellent anti-corrosion protection for industrial, coastal, petrochemical, bridge and offshore facilities in the atmospheric environment and water.
Physical Parameters:
Color: various colors
Volume solid content: 82±2%
Standard film thickness: Dry film: 150 microns Wet film: 183 microns
Theoretical coating rate: 3.7㎡/kg 5.4㎡/L (based on 150 micron dry film)
Actual Coverage Rate: Consider Appropriate Loss Factors
Flash point: 28±2℃(after mixing)
Construction Instructions:
Surface Preparation: All surfaces to be coated should be clean, dry and free of contamination. Before painting, all surfaces should be assessed and treated according to ISO8504:2000 standards. Pre-primed surfaces This product can be applied over anti-rust paint. The primer surface should be dry and free of contamination. Areas of spalling and damage should be treated to the specified standard Sa2.5 (ISO8501-1:2007) or SSPC-SP6 blast treatment standard, or SSPC-SP11 manual/power treatment standard, and should be treated before applying this product. Reapply primer to these areas.
Manual or powered processing
Perform manual or power processing to at least meet the standards of St3 (ISO8501-1:2007) or SSPC-SP2. Note: All oxide scale must be removed. Any parts that cannot be adequately treated with a shovel or striker gun should be subject to local blasting treatment to make the surface at least meet Sa2 (ISO8501-1:2007) or SPPC-SP6 standards. Generally speaking, this applies to Class C or D rust standards.
Surfaces precoated with zinc-containing primer
Check that the primer surface is clean, dry, and free of contamination and zinc salts before applying this product. Make sure the zinc-containing primer is completely cured before applying other paints.
Recommended surface roughness is 50-70 microns.
The substrate temperature should not be lower than 10℃ and should be at least 3℃ higher than the air dew point temperature.
Mixing: This product comes in two cans to form one unit. It must be mixed in pairs at one time according to the prescribed ratio every time, and used up within the prescribed mixing period.
(1) Stir the base ingredients (A) with a power mixer
(2) Mix all the curing agent (B) and base material (A) together and stir thoroughly with a power mixer.
Mixing service life:
15℃ | 25℃ | 35℃ |
4H | 2H | 1H |
Thinner: JINYU No. 1 Thinner
Construction method: | airless spray | air spray (with pressure tank) | brush/roller |
Dilution ratio: | 0-5% | 5-15% | 5-10% |
Airless spray:
Nozzle size: 0.58-0.79mm
Discharge pressure: 15MPa
Drying Time:
(Wet film thickness 156μm, relative humidity 50%) | 15℃ | 25℃ | 35℃ |
Fingers dry to touch | 6H | 2H | 1H |
Transportable | 18H | 8H | 4H |
fully cured | 14 days | 7 days | 3 days |
Recoat interval:
(Wet film thickness 156μm, relative humidity 50%) | 15℃ | 25℃ | 35℃ |
shortest | 18H | 8H | 4H |
Packing specifications: 25KG/group
