 |
| Quantity: | |||||||||
|---|---|---|---|---|---|---|---|---|---|
E156 water-based epoxy floor primer is a water-diluted epoxy primer, comprising a water-based epoxy curing agent, epoxy resin, deionized water, and a small amount of additives. This epoxy primer serves as an essential component in the application of epoxy floor coatings, providing a strong foundation for durable and long-lasting floors.
1. Epoxy floor primer plays a crucial role in the application of epoxy floor coatings, acting as a bonding agent between the substrate and the topcoat. Among various types of floor primers, water-based epoxy floor primers are increasingly favored for their superior performance, functionality, and environmental friendliness. They are particularly suitable for environments with high environmental requirements, such as factory floors and shopping mall floors in industries like electronics, food, medicine, and chemicals.
2. Product matching: E156 water based epoxy primer, E336 water based epoxy intermediate paint, E556 water-based epoxy top coat.
Product Features:
1. Has good adhesion to concrete substrate.
2. Diluted with water, green and environmentally friendly, with low VOC emissions.
3. Low odor and easy construction.
Technical Parameters:
NO. | Test items | Technical indicators | |
standard value | Actual value | ||
1 | state | Evenly mixed without lumps | Uniform condition with no lumps |
2 | Constructability | Barrier-free roller coating | Good construction properties |
3 | Surface drying | ≤6h | 4h |
4 | thoroughly drying | ≤36h | 24h |
Scope of Application:
1. Suitable for factory floors and shopping mall floors in electronics, food, medicine, chemical industry, etc. that have high environmental requirements.
2. For repair and renovation.
Precautions:
1. Environmental requirements: The compressive strength of the concrete floor should be ≥20Mpa, the tensile strength should be ≥1.5Mpa, and the flatness should be ±4mm/2m. The base surface must be dry, clean, free of oil and other pollution, and the construction temperature should be lower than 10 Construction should be stopped when the temperature reaches ℃. The flatness and density of the substrate have a certain impact on the coating amount, drying time and recoating interval.
2. Construction conditions: Ground base temperature: 10-35℃, construction environment temperature: 10-35℃, ground base moisture content: <8%, construction environment relative humidity: <80%.
3. Surface treatment: Before construction, dust, sand, cement laitance, grease, old coatings, etc. should be removed from the base surface, and polished to form a rough surface to open the capillary pores on the base surface.
4. Theoretical dosage: about 0.1 kg/square meter, which may vary slightly depending on the looseness of the base material.
5. How to use: Mix the main agent and the curing agent at a mass ratio of 3:1, and stir mechanically for 2 minutes until the mixture becomes uniform and creamy. Then add water to dilute and stir evenly. When applying the first coat, the amount of water added is 50% of the total amount of paint and curing agent. When applying the second coat, the amount of water added is 30-40% of the total amount of paint and curing agent.
6. The storage temperature is 5-35℃. It should be stored in a cool, ventilated and dry warehouse, away from fire and heat sources, and it is strictly prohibited to expose it to the sun.
E156 water-based epoxy floor primer is a water-diluted epoxy primer, comprising a water-based epoxy curing agent, epoxy resin, deionized water, and a small amount of additives. This epoxy primer serves as an essential component in the application of epoxy floor coatings, providing a strong foundation for durable and long-lasting floors.
1. Epoxy floor primer plays a crucial role in the application of epoxy floor coatings, acting as a bonding agent between the substrate and the topcoat. Among various types of floor primers, water-based epoxy floor primers are increasingly favored for their superior performance, functionality, and environmental friendliness. They are particularly suitable for environments with high environmental requirements, such as factory floors and shopping mall floors in industries like electronics, food, medicine, and chemicals.
2. Product matching: E156 water based epoxy primer, E336 water based epoxy intermediate paint, E556 water-based epoxy top coat.
Product Features:
1. Has good adhesion to concrete substrate.
2. Diluted with water, green and environmentally friendly, with low VOC emissions.
3. Low odor and easy construction.
Technical Parameters:
NO. | Test items | Technical indicators | |
standard value | Actual value | ||
1 | state | Evenly mixed without lumps | Uniform condition with no lumps |
2 | Constructability | Barrier-free roller coating | Good construction properties |
3 | Surface drying | ≤6h | 4h |
4 | thoroughly drying | ≤36h | 24h |
Scope of Application:
1. Suitable for factory floors and shopping mall floors in electronics, food, medicine, chemical industry, etc. that have high environmental requirements.
2. For repair and renovation.
Precautions:
1. Environmental requirements: The compressive strength of the concrete floor should be ≥20Mpa, the tensile strength should be ≥1.5Mpa, and the flatness should be ±4mm/2m. The base surface must be dry, clean, free of oil and other pollution, and the construction temperature should be lower than 10 Construction should be stopped when the temperature reaches ℃. The flatness and density of the substrate have a certain impact on the coating amount, drying time and recoating interval.
2. Construction conditions: Ground base temperature: 10-35℃, construction environment temperature: 10-35℃, ground base moisture content: <8%, construction environment relative humidity: <80%.
3. Surface treatment: Before construction, dust, sand, cement laitance, grease, old coatings, etc. should be removed from the base surface, and polished to form a rough surface to open the capillary pores on the base surface.
4. Theoretical dosage: about 0.1 kg/square meter, which may vary slightly depending on the looseness of the base material.
5. How to use: Mix the main agent and the curing agent at a mass ratio of 3:1, and stir mechanically for 2 minutes until the mixture becomes uniform and creamy. Then add water to dilute and stir evenly. When applying the first coat, the amount of water added is 50% of the total amount of paint and curing agent. When applying the second coat, the amount of water added is 30-40% of the total amount of paint and curing agent.
6. The storage temperature is 5-35℃. It should be stored in a cool, ventilated and dry warehouse, away from fire and heat sources, and it is strictly prohibited to expose it to the sun.
