 |
| Quantity: | |||||||||
|---|---|---|---|---|---|---|---|---|---|
E550 solvent based epoxy floor top coat stands as a premier solvent-based two-component epoxy resin functional coating, delivering unparalleled performance in floor protection. With its strong adhesion, durability, acid and alkali resistance, corrosion resistance, and wear resistance, this epoxy top coat ensures long-lasting protection for floors in various environments. Its waterproof, mildew-proof, and leak-proof properties make it ideal for use in sports venues, industrial workshops, indoor parking lots, storage warehouses, and other areas requiring clean, wear-resistant, corrosion-resistant, and water-resistant surfaces. With convenient construction, minimal material consumption, and low cost, E550 solvent based epoxy top coat is the ultimate solution for enhancing and protecting your floors. Whether you need epoxy floor paint, epoxy floor coating, or a solvent based epoxy floor coating, trust in E550 to deliver exceptional results.
Product Features:
Soft luster, bright colors, good wear resistance;
Diluted with water, green and environmentally friendly, with low VOC emissions.
Low odor and easy to construct.
Scope of Application:
Coating of parking lots, factories and offices, home decoration floors and places with high environmental requirements.
Technical Data:
Status: Even after stirring, no lumps, no impurities
Adhesion: Level 1
Hardness:＞H
Wear resistance: <0.04
Drying time: Surface dry: less than 6 hours
Hard work: less than 36 hours
(Temperature is 25℃, relative humidity is 50%)
Product Information:
The material is divided into two components: A and B.
Component A: solid color viscous liquid, 18kg/barrel
Component B: colorless transparent liquid, 6kg/barrel
Packaging: Printed metal packaging drum. It is recommended to stack it in three layers when stacking.
Storage: The storage temperature is 5-35℃. It should be stored in a cool, ventilated and dry warehouse, away from fire and heat sources. It is strictly prohibited to expose it to the sun.
Grassroots Requirements:
The compressive strength of the concrete floor should be≥20Mpa, the tensile strength should be≥1.5Mpa, and the flatness should be±4mm/2m based on ruler. The base surface must be dry, clean, and free of oil and other pollution.
Construction Tips:
Materials A and B should be used within 60 minutes after mixing. If the viscosity of the material is found to be significantly increased and it cannot be used anymore, it should be scrapped.
The construction environment must be clean, clean and dust-free to avoid affecting the coating effect.
Air circulation conditions will affect drying time.
Construction should be stopped when the temperature falls below 10℃.
It is not suitable for construction in humid weather. The ideal humidity for construction is 35%-80% (relative humidity). During construction and curing, when the relative air humidity is greater than 80%, the surface of the paint film may stick back and lose gloss.
Construction Conditions:
Ground base temperature: 10-35℃
Construction environment temperature: 10-35℃
Ground base moisture content: <8%
Relative humidity of construction environment: <80%
Construction methods/tools:
Dilution: Dilute with water, the amount of water added is 30-40% of the paint volume
Construction method: brushing, rolling or spraying
Tools: roller brush
Instructions for use:
Surface treatment: Before construction, dust, sand, cement laitance, grease, old coatings, etc. should be removed from the base surface and polished to form a rough surface. The capillary pores on the base surface should be opened, the floating dust on the surface should be cleaned, and water-based epoxy should be used. Primer seals the base surface, and water-based epoxy intermediate paint levels it.
Theoretical dosage: about 0.20-0.25㎏/㎡
Ratio: Mix the main agent and curing agent at a weight ratio of 3:1, and stir mechanically for 2 minutes until the mixture becomes uniform and creamy. Then add 30-40% of the paint volume with water to dilute it and stir evenly.
Can be applied by brush, roller or spray.
Note: Components A and B must be fully emulsified by mechanical stirring, otherwise it will cause many adverse effects on the surface of the paint film, such as stickiness, whitening, uneven gloss, poor hardness, etc.
E550 solvent based epoxy floor top coat stands as a premier solvent-based two-component epoxy resin functional coating, delivering unparalleled performance in floor protection. With its strong adhesion, durability, acid and alkali resistance, corrosion resistance, and wear resistance, this epoxy top coat ensures long-lasting protection for floors in various environments. Its waterproof, mildew-proof, and leak-proof properties make it ideal for use in sports venues, industrial workshops, indoor parking lots, storage warehouses, and other areas requiring clean, wear-resistant, corrosion-resistant, and water-resistant surfaces. With convenient construction, minimal material consumption, and low cost, E550 solvent based epoxy top coat is the ultimate solution for enhancing and protecting your floors. Whether you need epoxy floor paint, epoxy floor coating, or a solvent based epoxy floor coating, trust in E550 to deliver exceptional results.
Product Features:
Soft luster, bright colors, good wear resistance;
Diluted with water, green and environmentally friendly, with low VOC emissions.
Low odor and easy to construct.
Scope of Application:
Coating of parking lots, factories and offices, home decoration floors and places with high environmental requirements.
Technical Data:
Status: Even after stirring, no lumps, no impurities
Adhesion: Level 1
Hardness:＞H
Wear resistance: <0.04
Drying time: Surface dry: less than 6 hours
Hard work: less than 36 hours
(Temperature is 25℃, relative humidity is 50%)
Product Information:
The material is divided into two components: A and B.
Component A: solid color viscous liquid, 18kg/barrel
Component B: colorless transparent liquid, 6kg/barrel
Packaging: Printed metal packaging drum. It is recommended to stack it in three layers when stacking.
Storage: The storage temperature is 5-35℃. It should be stored in a cool, ventilated and dry warehouse, away from fire and heat sources. It is strictly prohibited to expose it to the sun.
Grassroots Requirements:
The compressive strength of the concrete floor should be≥20Mpa, the tensile strength should be≥1.5Mpa, and the flatness should be±4mm/2m based on ruler. The base surface must be dry, clean, and free of oil and other pollution.
Construction Tips:
Materials A and B should be used within 60 minutes after mixing. If the viscosity of the material is found to be significantly increased and it cannot be used anymore, it should be scrapped.
The construction environment must be clean, clean and dust-free to avoid affecting the coating effect.
Air circulation conditions will affect drying time.
Construction should be stopped when the temperature falls below 10℃.
It is not suitable for construction in humid weather. The ideal humidity for construction is 35%-80% (relative humidity). During construction and curing, when the relative air humidity is greater than 80%, the surface of the paint film may stick back and lose gloss.
Construction Conditions:
Ground base temperature: 10-35℃
Construction environment temperature: 10-35℃
Ground base moisture content: <8%
Relative humidity of construction environment: <80%
Construction methods/tools:
Dilution: Dilute with water, the amount of water added is 30-40% of the paint volume
Construction method: brushing, rolling or spraying
Tools: roller brush
Instructions for use:
Surface treatment: Before construction, dust, sand, cement laitance, grease, old coatings, etc. should be removed from the base surface and polished to form a rough surface. The capillary pores on the base surface should be opened, the floating dust on the surface should be cleaned, and water-based epoxy should be used. Primer seals the base surface, and water-based epoxy intermediate paint levels it.
Theoretical dosage: about 0.20-0.25㎏/㎡
Ratio: Mix the main agent and curing agent at a weight ratio of 3:1, and stir mechanically for 2 minutes until the mixture becomes uniform and creamy. Then add 30-40% of the paint volume with water to dilute it and stir evenly.
Can be applied by brush, roller or spray.
Note: Components A and B must be fully emulsified by mechanical stirring, otherwise it will cause many adverse effects on the surface of the paint film, such as stickiness, whitening, uneven gloss, poor hardness, etc.
