 |
| Quantity: | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Product Introduction:
This product is an economical and environmentally friendly interior wall coating material. It has good adhesion, is easy to construct, economical, non-toxic and has no odor. It is an ideal choice for economical home decoration and public space decoration.
Main Feature:
*This product has been certified by the China Environmental Labeling Certification Committee
* Economical and environmentally friendly interior wall finishing paint with high cost performance * Strong covering power and scrub resistance
*Excellent adhesion, long-term protection of the wall
*Soft gloss, easy to apply
Scope of application:
It can be widely used in the decoration and protection of various interior walls.
Technical Parameters:
Implementation standards: GB/T9756-2018, GB18582-2020
Theoretical paint consumption: 3~4 square meters/kg/two coats (calculated based on dry film thickness of 30 microns)
Drying time: 1 hour to surface dry (at an ambient temperature of 23°C and a relative humidity of 50%)
Complete dry for 2 hours (at an ambient temperature of 23°C and a relative humidity of 50%)
Recoating time: 4 hours (at an ambient temperature of 23°C and a relative humidity of 50%
Contrast ratio: ≥0.91
Scrub resistance: ≥1000 times
Shelf life: 24 months from the date of production (unopened)
Use reference:
Please read the instructions for use before construction
*Substrate: should be solid, clean, dry (moisture content ≤10%), PH<10; for powdered substrates, use tools such as a spatula or wire brush to remove the powdered layer and completely remove mold spots.
*Old paint film: Check the aging of the old paint film, and loose parts should be completely removed
*Salting out: It is recommended to treat with oxalic acid solution of appropriate concentration (the specific concentration should be determined according to the degree of salting out, but the concentration generally does not exceed 5%), then rinse with clean high-pressure water and dry
*Construction method: either roller coating or spraying
*Dilution: Generally, there is no need to add water to dilute it. If the material is thick, you can add no more than 5% water to dilute it.
*Utensil cleaning: Wash with clean water in time after construction is completed
*Safety and labor protection: Safety measures should be taken during construction and labor protection clothing should be worn.
*Supporting system: NQ-401 Meidi alkali resistant primer
Packaging specifications:
20/25kg iron drum packaging
Product Introduction:
This product is an economical and environmentally friendly interior wall coating material. It has good adhesion, is easy to construct, economical, non-toxic and has no odor. It is an ideal choice for economical home decoration and public space decoration.
Main Feature:
*This product has been certified by the China Environmental Labeling Certification Committee
* Economical and environmentally friendly interior wall finishing paint with high cost performance * Strong covering power and scrub resistance
*Excellent adhesion, long-term protection of the wall
*Soft gloss, easy to apply
Scope of application:
It can be widely used in the decoration and protection of various interior walls.
Technical Parameters:
Implementation standards: GB/T9756-2018, GB18582-2020
Theoretical paint consumption: 3~4 square meters/kg/two coats (calculated based on dry film thickness of 30 microns)
Drying time: 1 hour to surface dry (at an ambient temperature of 23°C and a relative humidity of 50%)
Complete dry for 2 hours (at an ambient temperature of 23°C and a relative humidity of 50%)
Recoating time: 4 hours (at an ambient temperature of 23°C and a relative humidity of 50%
Contrast ratio: ≥0.91
Scrub resistance: ≥1000 times
Shelf life: 24 months from the date of production (unopened)
Use reference:
Please read the instructions for use before construction
*Substrate: should be solid, clean, dry (moisture content ≤10%), PH<10; for powdered substrates, use tools such as a spatula or wire brush to remove the powdered layer and completely remove mold spots.
*Old paint film: Check the aging of the old paint film, and loose parts should be completely removed
*Salting out: It is recommended to treat with oxalic acid solution of appropriate concentration (the specific concentration should be determined according to the degree of salting out, but the concentration generally does not exceed 5%), then rinse with clean high-pressure water and dry
*Construction method: either roller coating or spraying
*Dilution: Generally, there is no need to add water to dilute it. If the material is thick, you can add no more than 5% water to dilute it.
*Utensil cleaning: Wash with clean water in time after construction is completed
*Safety and labor protection: Safety measures should be taken during construction and labor protection clothing should be worn.
*Supporting system: NQ-401 Meidi alkali resistant primer
Packaging specifications:
20/25kg iron drum packaging
